I will be putting 2010 Camero SS rims on the car so some modifications had to be made.
The Camaro rims hub is smaller then the Rivera disc conversion rotor so I decided to grind down the hub on the rotor to fit the rim. Also the Rivera Rotor is a 5 x 5 bolt pattern and the Camaro Rim is 5 x 4.75 so I’ll be using some 1 1/2 inch adapter spacers. I did run into a problem that the adapter studs are 12 x 20 and the Camaro is supposed to use 14mm x 1.50 studs. So I’m going to try and drill out the adapters and install the proper 14mm x 1.50 studs.