6/13/2013 Picked the car up from Tom Argue Designs today.

Rearend hung with parallel bars and setup for coilover shocks. Brake lines run, shifter fixed and gas pedal mounted.

Tom argue designs

Dropped the car off at Tom Argue Designs today. They’re going to redo the rear suspension, run brake lines, coilovers front and rear, mount gas pedal and reinforce theĀ  brake booster.

12/28/2012 – installed spacer and remounted brake booster

image

image

12/26/2012 i rolled the car out of the shop and took some pictures.

image

image

image

image

image

12/13/12

Mocked up the booster on the firewall. I think its to close so I’m going to get the spacer bracket for it.

image

image

11/20 Axles and rear brakes

11/20 installed new axles and right stuff detailing rear disk conversion.
Rear axles studs are 1/2 but the fronts are 14mm so now I have to get all new matching lugnuts.

image

image

image

image

10/1 new oil pan

Put a new oil pan from an H3 on tonight. The old truck one sat low and was leaking plus I’ll gain about 1 inch of clearance. I wanted to get one from a GTO or fbody car but I got a good deal on the H3 pan so that’s what I’m using.

20121002-001133.jpg

20121002-001157.jpg

9/22 rearend

I think somethings wrong here.
at my desired ride height the wheel is pushed really far back. I’m thinking that this rear set up has to be redone.

image

image

I

image

image

image

image

8/21/2012 new 1/2″ spacers.

put new 1 1/2″ spacers. 5×5 to 5x120mm with 14mm wheel studs. the center cap now fits on.

image

image

passenger side brakes and wheel

finally had a chance to do the other side but the wheel adapters are messed up and the wheel is wobbling real bad.
bad.

image